How to mount a TV above a fireplace without nails: does it work? (2023)

FAQs

How do you mount a TV above a fireplace without drilling? ›

Use Brick Clamps

Another method that our experts tried is using brick clamps to securely hold the TV without drilling it into the brick wall. Clamps had been used for decades, so this option is time-tested and reliable.

Fire Heat and Smoke Can Harm a TV

It is generally not safe to mount a TV over a wood-burning fireplace. That's due to both the high heat and smoke that wood fires create. Any heat and smoke not vented up the chimney will cascade over the front of the mantel and around your TV, damaging the electronics.

Mounting A TV On Drywall Over The Fireplace

Either is fine for mounting a TV, but you'll want to make sure you have classic wood studs if you plan to put cables through the wall. It'll give you more space to feed wires or add wall grommets. Furring strips are just too narrow for most cable management solutions.

There are many ways to mount a TV screen in your home with or without drilling. It's always worth considering drill-free TV mounts so that you can customize your space exactly how you like it.

Can You Hang a TV with Command Strips? You could hang a TV with Command Strips, but it is not recommended for most TV screens. Command Strips double-sided tape can support weights up to 16 pounds (7.25kg) – therefore, it could be considered for very small screens.

How Hot Can a TV Get Before Damage? Typically, many manufacturers say a TV can withstand up to 125°F.

To protect your TV from the heat of your fireplace, you need to take steps to redirect the heat away from where you have it mounted. A fireplace mantel is one of the most effective ways to divert heat. Another step that you can take to redirect heat away from your TV is to install a fireplace hood.

Since heat rises, a TV placed over a fireplace can be at-risk for damage. There are ways to reduce the heat above the fireplace and protect the life of your devices, however, such as adding a shelf or mantle between the fireplace and TV. Make sure you have plenty of room between the two for safety purposes.

A TV mount for walls without studs can hold up to 80 pounds. However, it depends on several factors, such as the type of mount, wall anchor specifications, and the condition of your drywall.

Mounting a tv with drywall anchors or bolts is a great option if you can't drill into a stud. You'll need to use a hollow wall anchor that looks similar to a regular screw, with a butterfly toggle at the end. Once they're placed in the wall, they'll attach to the back.

What if there are no studs in my wall? ›

In most situations you can use a hollow-wall anchor, which is designed to attach to the wall in the hollow spaces between the studs. Hollow-wall anchors come in a wide range of sizes and styles for use on virtually any wall, including drywall, plaster, and even hollow concrete block.

Using an adhesive TV wall mount

In addition to having a TV mount shelf, by using very solid adhesive tapes or glues, you can even simply stick the TV to the wall without needing to drill holes on it.

The weight without the stand is 11.46 pounds and the weight with the stand is 11.68 pounds.

Landlords may overlook small holes, but larger ones might cause concern when it's time to move out. Good thing that the holes left behind by a properly-mounted TV will be small!

You don't prepare the surface correctly

Strips work best on clean, smooth surfaces, so wipe the wall with isopropyl rubbing alcohol (methylated spirits) first. This will ensure your strip bonds properly with the wall. Avoid using other surface sprays or cleaning wipes, which may leave a slippery residue.

The large strips can handle a 24-inch to 36-inch object that weighs up to 16 pounds. The smaller hanging strips can only handle up to 4 pounds.

Command™ Picture Hanging Strips make decorating quick and easy. Best of all, when you are ready to take down or move your pictures, they come off cleanly—no nail holes, cracked plaster or sticky residue.

Description. This app will help you detect ferrous metal objects. It uses the magnetometer to measure the magnetic field when your iPhone is placed near ferrous metal objects.

Standard electronic stud finders can easily detect these drywall studs, but a home with a brick facade requires a stud finder with a deep-scanning option; these facades can be up to 1 inch thick. Using a higher-end deep-scanning device will allow you to find studs through the facade with accuracy and speed.

Is 65 inch TV too big above fireplace? ›

TVs around 55-65 inches are typically best placed above a fireplace. The viewing distance, on the other hand, may influence the size. If your sofa or sitting area is more than 6′ 5″ from the TV, you'll almost certainly require a TV larger than 55 inches.

In general, the answer is 60-68 inches above the ground; however, this number will vary depending on the height of the homeowner. If you have to lift or strain your neck at all, it's too high.

Above Fireplace Mounting

The rule of thumb is, if your mantel is less than four feet from the floor, you should mount your TV about 12 inches above it. This rule applies to a fireplace without a mantel as well.

The short answer is – yes. However, to ensure your television isn't damaged from the heat, care must be taken to ensure heat generated by the fireplace is redirected away from television. There are several ways to do this, such as installing a proper mantel and building an alcove for the television.

It depends, but the short answer is yes. Extended exposure to high heat can potentially cause dead pixels and melted components in televisions. To be sure a TV above a linear fireplace will be safe, first perform the thermometer test described below to determine if the wall gets too warm.

The Consumer Product Safety Commission says about 8,900 flat-screen TVs are being recalled because a faulty electronic component that can catch fire. Six incidents of the TVs overheating, smoking or catching fire have been reported, the agency says.

Mortar is much softer than brick, and the anchor's grip will eventually deteriorate. Always drill into the brick, but not within a half-inch of its edges as it can crack. Keep in mind that many brackets offer several screw holes to choose from.

Using a level, determine the desired height of the display. Next, attach the mount to the brick fireplace. Using a hammer drill, drill a hole (the same diameter as the anchor diameter) using a carbide-tipped masonry bit. Insert the Sleeve Anchor into the hole and make sure it is secure and positioned correctly.

How much does a 55-inch TV weigh? A 55-inch TV weighs between 25 and 50 pounds with its stand, but this varies significantly depending on the type of TV. The TCL 4-Series 55-inch TV weighs 24.9 pounds with stand, for example, while the LG C1 weighs twice as much at 50.7 pounds with stand.

No, drywall is just paper. If you need to mount it on the wall, but between studs, use an anchor plate that can be attached to the studs, then mount the TV to the plate. You can buy a steel plate, or just make one out of heavy plywood.

Is it safe to mount TV on drywall? ›

Yes, you can use drywall anchor bolts such as toggle anchors or molly bolts. They can hold up to 100 pounds and secure your TV to the wall without needing wall studs.

Toggle bolts are the types of drywall anchors that can support up to 50 pounds, while steel hollow-wall anchors have a drywall anchors weight limit of up to 100 pounds.

Even if you have the right fittings and proper mount, if you do not install it properly, your television has a chance of falling off the wall. Proper installation is another essential piece of the puzzle to wall mounting.

You must screw into studs when mounting a TV on the wall. Do not use hollow-wall anchors, as they cannot support the weight of TV wall mount brackets and the television. Once you've picked an ideal location for hanging a TV on the wall, run a stud finder along the top of the paper.

Best Stud Finder App for iOS and Android

Use studfinder in the same way as other hand-held stud detector devices. The LEDs light up in sequence with proximity to metal studs and fasteners as your device's magnetometer sensor passes over the wall stud.

The best way to hang things without a wall anchor is by securing the item to a stud. This can be as simple as driving a screw straight into the drywall and then into the stud, or a piece of wood can be mounted to span multiple studs.

If the screen does not have mounting holes, you can still attach your TV to a monitor mount with an adapter. There are VESA adapters for all popular manufacturers e.g. Apple, LG OLED, Loewe, Metz, Samsung, Sony, ViewSonic, and much more available.

You can check with your manufacturer, but most TVs can safely withstand up to 125°F. Since the TV generates it's own heat you want to keep the ambient temperature around it several degrees below that.

How do you mount a TV renter friendly? ›

You can of course hang your tv without studs using strong mollies, but a more renter-friendly method that is less damaging to the wall is to secure your wall mount into studs. The most efficient way to find studs in the wall is to use a stud finder. These can easily be purchased at your local hardware store or online.

Using an adhesive TV wall mount

In addition to having a TV mount shelf, by using very solid adhesive tapes or glues, you can even simply stick the TV to the wall without needing to drill holes on it.

Can I mount a TV on drywall without studs? Yes, you can use drywall anchor bolts such as toggle anchors or molly bolts. They can hold up to 100 pounds and secure your TV to the wall without needing wall studs.

So, can you put a TV above an electric fireplace? In short, yes. For most electric fireplaces, it is perfectly safe to use a TV wall mount to hang a TV above your fireplace. The only time this isn't good for your TV is if the heat is blown directly upward.

To protect your TV from the heat of your fireplace, you need to take steps to redirect the heat away from where you have it mounted. A fireplace mantel is one of the most effective ways to divert heat. Another step that you can take to redirect heat away from your TV is to install a fireplace hood.

The fastest and easiest way to find out the VESA size of your TV is just by measuring it. You can easily locate the four holes in the back of your television.

Before buying a certain TV, check for a “VESA” sign on it. This means that the TV follows the Video Electronics Standards Association set guidelines for a standardized TV wall mount. Even if the TV doesn't follow these standards, it should be marked if it can be used with wall brackets.